Approx. 1.1 Lakh / Unit
Get Latest Price
Froth flotation is an important concentration process. This process can be used to separate any two different particles and operated by the surface chemistry of the particles. In flotation, bubbles are introduced into a pulp and the bubbles rise through the pulp. In the process, hydrophobic particles become bound to the surface of the bubbles. The driving force for this attachment is the change in the surface free energy when the attachment occurs. These bubbles rise through the slurry and are collected from the surface. To enable these particles to attach, careful consideration of the chemistry of the pulp needs to be made. These considerations include the pH, Eh and the presence of flotation reagents. The pH is important as it changes the charge of the particles surface and the Eh effects the chemisorption of collectors on the surface of the particles.
The addition of flotation reagents also effects the operation of these processes. The most important chemical that is added is the collector, This chemical binds to the surface of the particles as it is a surfactant. The main considerations in this chemical is the nature of the head group and the size of the hydrocarbon chain. The hydrocarbon tail needs to be short to maximize the selectivity of the desired mineral and the headgroup dictates which minerals it attaches to.
The frothers are another important chemical addition to the pulp at it enables stable bubbles to be formed. This is important as if the bubble coalesce, minerals fall off their surface. The bubbles however should not be too stable as this prevents easy transportation and dewatering of the concentrate formed. The mechanism of these frothers is not completely known and further research into their mechanisms is being performed.
Depressants and activators are used to selectively separate one mineral from another. Depressants inhibit the flotation of one mineral or minerals while activators enable the flotation of others.
There are a number of cells able to be used for the flotation of minerals. these include flotation columns and mechanical flotation cells. The flotation columns are used for finer minerals and they typically have a higher grade and lower recovery of minerals than mechanical flotation cells. The cells in use at the moment can exceed 300 m3. This is done as they are cheaper per unit volume than smaller cells, but they are not able to be controlled as easily as smaller cells.Flotation Equipments :
Flotation columns Continuous flotation cells Electro-Flotation Cells Flotation MachineSpecifications:
- Weight: 0.5-3.5 T
- Voltage: 380V
- Material: Steel